CONTROLS/INSTRUMENTS
Display Settings
Setting Metric/Imperial Units
1. Push and hold SET (S) button for three seconds.
2. Main digital displays scrolling message: PUSH _M_ TO SELECT KM, _S_ TO
SELECT MI.
3. Push MODE (M) button to selectmetric units or SET (S) button to select imperial
units.
Setting Clock
1. Press MODE (M) button to select clock display.
2. Push and hold MODE (M) button for three seconds.
3. Press MODE (M) button to select 12:00 AM PM or 24:00 time base.
4. If 12:00 AM PM time base is selected, A or P flashes. Press MODE (M) button
to select A (AM) or P (PM).
5. Press SET (S) button to change hours.
6. Press MODE (M) button to switch to minutes (minutes flash).
7. Press SET (S) button to change minutes.
8. Press MODE (M) button.
Setting Language
For display language setting, refer to an authorized Can-Am roadster dealer.
_______________
21
To Next Page
Loading...
Need help?
General
