Can-Am Spyder ST Series User Manual

UNCRATING
rbl2014-004-028_a
SCREWS TO REMOVE, BOTH SIDES OF CARGO MODULE
SUB-CRATE
2. Remove protective foam from vehicle.
rbl2010-002-005
3. Remove windshield from front wheels.
rbl2014-004-029_a
1. Windshield to remove
2. Cut
tapes here
4. Remove front wheels from crate base.
rbl2013-003-001_b
TYPICAL
1. Front wheels
5. On RH side, remove shipping covers from fend-
ers.
6. Remove two fenders from s ub-crate.
rbs2011-014-002_a
TYPICAL - RH SIDE - SUB-CRATE THAT CONTAINS FRONT
FENDER
1. Bolts to remove (6)
7. Remove fender sub-crate.
rbl2014-004-002
FRON
T FENDER SUB-CRATE REMOVAL
6 / 41 2014-3 PREDELIVERY

Can-Am Spyder ST Series Specifications

General

Front Suspension	Double A-arm with anti-roll bar
Rear Suspension	Swing arm with monoshock
Rear Tire	225/50R15
Transmission	5-speed manual (SM5) or 5-speed semi-automatic (SE5) with reverse
Fuel System	Electronic Fuel Injection
ABS	Standard
Traction Control	Standard
Stability Control	Standard
Front Tires	165/55R15