CAN Albert - Customising Your Albert Device; Albert Display Customisation; Albert Sound Settings; Albert Communication Setup

Albert User Guide
15
3. Customising Albert
Every business is different. That's why we’ve designed Albert so you
can adapt your device to work best for you.
In this section:
 Choosing display features
 Customising sounds
 Setting up communications
 Connecting an email account
 Changing passwords
 Accessing other options
Choosing display features
Brightness
To change the screen brightness, tap Display then Brightness. Slide the bar to
the left or right then tap OK.
Automatic lock
Tap Display, then Automatically lock. Choose the length of time that can pass
before you’re prompted to enter a password to wake up Albert. Tap Time.
Tip
Different options may be available depending if you use a Manager or Operator
password to access Settings.
Customising sounds
Volume
To change the volume of alerts and other sounds, tap Sound then
Volumes. Slide the bars to the left or right, then tap OK.
Touch sounds
Choose if you want Albert to make a sound when the screen is touched. Tap
Touch sounds to check or uncheck the box.
Setting up communications
WiFi
Tap Communications then WiFi.
 To turn WiFi on, slide the tab on the Status Bar from Off to On. Choose
your WiFi network from the list. You can also Add network or Scan for
a network using the tab on the Status Bar.
 To turn WiFi off, slide the tab on the Status Bar from On to Off.
3G
When no WiFi is available or selected, Albert will automatically use the
inbuilt 3G Telstra service.