To Next Page
B
Brenda AshleyJul 28, 2025
What to do if the gas flow is irregular in my CAN FC?
- SSandra BrownJul 28, 2025
If the gas flow in your CAN Hob seems irregular, take the following steps: * Ensure the gas cock is fully open. * Verify the fuel supply circuit has an adequate flow rate. * Confirm burner spreaders and caps are correctly placed and unobstructed. * Check the nozzles are appropriate for the gas type used. * Assess compatibility and calibration of the pressure regulator, if one is present. * Inspect the gas supply pipe for obstructions, bends, crushing, excessive length, or unsuitability.
General
