36
5
Settings
To Turn Backlight On/Off:
1. Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
Enter the master user code.
The zone 8 LED lights.
2. Press the
key five
times until you see the fol-
lowing pattern of lit zone
LEDs:
1 2 3 4 5 6 7 8
3. Press the key. If you
hear three beeps, the back-
light is now on. If you hear
one continuous 3-second
beep, the backlighting is now
off.
4. To exit, press the
key.
Whenever you use your key-
pad, a light automatically illumi-
nates the keys. This backlight
shuts off 60 seconds after you
have finished using the keypad.
If you wish, you can set the
backlight to shine continuously.
If you turn the backlight on, you
can turn it off again by repeat-
ing the procedure to the right.
How to Turn the Backlight On/Off
To Next Page
Loading...
