C&K systems System 238 - After an Alarm Occurs

19
AFTER AN ALARM OCCURS:
Enter your PIN and push the
# key.
This will silence the siren/bell and disarm the system.
.
The red ZONE lights on the keypad will flash to help you remember
where the violations occurred.
.
PIN
REQUIRED
If this is a false alarm and no emergency response is needed, call
our central station IMMEDIATELY at to
cancel the alarm.
Write down the number of the triggered zones to help us service you.
.
Clear the alarm memory and red ZONE lights
by pushing the key, entering the digit "1",
then pushing the # key.
1
#
#
*
*