Candy CDCP 6/E User Manual

How to Keep Your Dishwasher in Shape
It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
seals to last longer and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odors to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
8.Installation instruction
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odors are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water with a little
vinegar, or a cleaning product made specifically for
dishwashers.
After Every Wash
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
When not in use for a long time
15
The installation of the pipes
and electrical equipments
should be done by qualified
professionals.
Warning
Electrical Shock Hazard
Disconnect electrical power
before installing dishwasher.
Failure to do so can result in
death or electrical shock.
Attention:
The installation position of dishwasher should be near the existing water inlet tap and drain
outlet and power socket.
One side of the cabinet sink should be chosen to facilitate the connection of drain
hoses of the dishwasher.
Installation preparation
Cleaning the Spray Arms
The spray arms can be easily removed for periodic cleaning
of the nozzles to prevent possible clogging. Wash them
under running water and carefully replace them in their seats,
checking that their rotary movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove
it. Wash the arms under a jet of running water and replace it
carefully to its seat. After reassembly, check that the spray
arms rotate freely. Otherwise, check that they have been
installed correctly.

Candy CDCP 6/E Specifications

General

Door color	White
Door hinge	Standard
Control type	Buttons
Product size	Compact
Custom panel-ready	-
Appliance placement	Countertop
Lower basket safety stop	Yes
Upper basket adjustable height	No
Cycle time	195 min
Noise level	51 dB
Drying system	Condensation
Delay start (max)	8 h
Dishwashing programs	Eco, Quick
Left-on mode duration	999 min
Number of place settings	6 place settings
Number of washing programs	6
Maximum hot water supply temperature	60 °C
Current	6 A
Power plug type	Type F (CEE 7/4)
AC input voltage	230 V
Energy efficiency scale	A to G
Power consumption (off)	0.3 W
Power consumption (left-on)	0.45 W
Water consumption per cycle	7 L
Energy consumption per cycle	0.62 kWh
Package depth	605 mm
Package width	555 mm
Package height	503 mm
Package weight	25000 g
Drying class	A
Annual water consumption	1960 L
Annual energy consumption	174 kWh

Weight and Dimensions

Depth	500 mm
Width	550 mm
Height	438 mm
Weight	21000 g