© 2002 Cannondale Corporation - All Rights Reserved
38
Motorcycle Fluids.fm
2. When all pressure has escaped, press down on
the cap and keep turning it until it can be
removed.
3. The coolant level should be at the bottom of the
filler neck.
4. Reinstall the radiator cap.
5. Check the entire cooling system for leaks.
6. If the coolant level drops after adding and no
leaks are found, contact an authorized
Cannondale Motorsports Dealer for servicing.
1. Radiator cap
a. Loosening direction
1. Coolant level
2. Filler neck
(1)
(a)
(2)
(1)
To Next Page
Loading...
