99
Printed : 1/9/02
99
2002 MODEL SPECIFICATIONS
NOTE :
The specifications are subject to change for product improvement without notice.
ENGINE
X440 C440 E440
Engine 4 - stroke single
Bore and stroke 95 mm x 61 mm
Compression ratio 12.5: 1
Displacement 432 cc
Engine Management System MC 1000, EFI, 11,600 rpm soft rev limiter
Engine oil
Recommended viscosity: 10W40
Classification: Use only high-detergent,
premium quality synthetic motor oils with
the American Petroleum Institute (API)
service classification SF or SG type
displayed on the container.
NOTE :
Other viscosities can be used when the
average temperature range is within the
indicated range.
CAUTION
Be sure to change the engine oil and clean/replace the
filters in accordance with the vehicle maintenance
schedule. Service more frequently when operating under
severe conditions.
Engine oil quantity (dry fill) 1500cc (1.7 US qt.)
Transmission oil 80W or 85W (Do not use hypoid gear oils)
Transmission oil quantity (dry fill) 600 cc (0.85 US qt.)
Cooling system Liquid cooled
Coolant
1:1 water/anti-freeze [ethylene glycol (containing corrosion
inhibitors for aluminum engines and radiators)]
Ignition system Constant - energy inductive coil
Starting system Electric start
Lubrication system Dry sump
Compression release Automatic
Transmission 5-speed cassette
TEMP
(F°)
-20 -15 -10 -5 0 5 10 15 20 25 30 35 40
-4 5 14 23 32 41 50 59 68 78 86 95 104
TEMP
(C°)
20W 50
15W 50
10W 40, 10W 50
10W 30
0W 40
To Next Page
Loading...
