© 2001 Cannondale Corporation - All Rights Reserved
54
Motorcycle Maintenance and Adjustment.fm
5. Tighten the hose clamps securely.
6. Inspect the quick connect fitting O-rings.
Replace them with new ones if you find and
swelling, tears, rips or other damage.
Coat O-rings with O-ring lubricant or clean
engine oil and reinstall into the tank fitting.
Make sure you press in the tab on the tank
fitting before inserting the hose end or you can
tear the O-rings.
IDLE SPEED ADJUSTMENT
SERVICE: Engine idle speed
2100- 2200 r/min
The idle speed adjustment screw is located on the
throttle body and is accessible from the left side of
the vehicle.
A special software diagnostic tool and data cable
is necessary to communicate with the vehicle ECU
and accurately read (display) the engine rpm. For
this reason, we strongly recommend that this
procedure be left to a Cannondale Service
technician. Contact your Cannondale Dealer for a list
of special tools available for your vehicle.
1. Fuel filter
FUEL
To Next Page
Loading...
