38
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However,notethatdatestampscannotbeeditedorremoved,soconrm
beforehand that the date and time are correct (=
14).
1 Congurethesetting.
Press the <n> button, choose [Date
Stamp
] on the [4] tab, and then
choose the desired option (=
25).
Once the setting is complete, [ ] is
displayed.
2 Shoot.
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
To restore the original setting, choose
[Off] in step 1.
• Date stamps cannot be edited or removed.
• Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may
cause it to be printed twice.
- Print using printer functions (=
176)
- Use camera DPOF print settings (=
180) to print
- Use the software downloaded from the Canon website to print (=
173)
Still Images Movies
Choosing Subjects to Focus On (Tracking AF)
In [AUTO] mode, shoot after choosing a subject to focus on as follows.
1 Specify Tracking AF.
Press the <o> button.
[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
Aim the camera so that [ ] is on the
desired subject, and then press the
shutter button halfway.
A blue frame is displayed, and the
camera will keep the subject in focus and
image brightness adjusted (Servo AF).
3 Shoot.
Press the shutter button all the way down
to shoot.
Press the <
o
> button to cancel Tracking AF.
• Tracking may not be possible when subjects are too small or move too rapidly,
or when subject color or brightness matches that of the background too closely.
To Next Page
Loading...
Need help?
General
