86
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
• In [Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (=
89).
• In [Z]mode,evenaftertheashres,ensurethatthemainsubject
doesnotmoveuntiltheshuttersoundisnishedplaying.
[!] Off
Forshootingwithouttheash.
• If a blinking [
] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
Still Images
Adjusting the Flash Exposure Compensation
Just as with regular exposure compensation (=
68), you can adjust the
ashexposurefrom–2to+2stops,in1/3-stopincrements.
Raisetheash,pressthe<r> button and
immediately turn the <z> dial to choose
the compensation level, and then press
the <m> button.
Thecorrectionlevelyouspeciedisnow
displayed.
• When there is a risk of overexposure, the camera automatically adjusts the
shutterspeedoraperturevalueduringtheashshotstoreducewashed-
out highlights and shoot at optimal exposure. However, you can deactivate
automatic adjustment of the shutter speed and aperture value by accessing
MENU (=
25) and choosing [4]tab►[FlashControl]►[SafetyFE]►
[Off].
• Youcanalsoconguretheashexposurecompensationbychoosing[X] in
the FUNC. menu (=
24
), or by accessing MENU (=
25
) and choosing
[4]tab►[FlashControl]►[FlashExp.Comp].
• You can also access the [Built-in Flash Settings] MENU screen (=
25) as
follows(exceptwhenanoptionalexternalashismounted).
- Press and hold the <r> button for at least one second.
- Whentheashisup,pressthe<r> button and immediately press the
<n> button.
To Next Page
Loading...
Need help?
General
