Canon ae1 - Page 5

Puncher Unit-Ll/Ml/Nl/Pl
[I] Punch front lower cover 1 PC. [8] Surface cover 1 PC.
[2] Punch front lower extension cover 1 pc. [9] Mounting stepped screw (M4X4) 2 pcs.
[3] Punch front lower cover fixing plate 1
1 pc. [lo] Stepped screw (M4X5) 2 pcs.
[4] Punch front lower cover fixing plate 2
1 pc.*l [l 11 Stepped screw (M4X10) 2 pcs.
[5] Punch Jam Removal label
1 PC. [12] Screw (binding; M4X6) 5 pcs.*2
[6] Punch fixing plate (front) 1 PC. [13] Screw (tapping; M4X2) 3 pcs.
[7] Punch fixing plate (rear)
1 PC.
* 1 : Only for the Finisher-AEl .
*2:
4 pc. used if for the Saddle Finisher-AE2.