Canon CanoScan FS4000US User Manual

Adjusting Images
81
1
2
3
4
5
FilmGet FS User’s Guide
Adjusting the Brightness/Contrast
The brightness/contrast adjustment mode is available when the color mode is set to
[42-Bit Color]
,
[24-Bit Color]
,
[14-Bit Grayscale]
or
[8-Bit Grayscale]
. Use this mode to adjust the overall
brightness or contrast (difference between highlights and shadows) of an image. This mode is
particularly useful when the original image is too bright or too dark, or the contrast is too flat.
Guide to the Brightness/Contrast Tab
Brightness Slider Tab
Drag the slider tab left (darker) or right
(brighter) to change the brightness setting.
Brightness Value Input Box
Input a value from –100 to +100 and press the
[Tab]
key to set the brightness level. You can
also use the arrow keys to adjust the
value.
Contrast Value Input Box
Input a value from –100 to +100 and press the
[Tab]
key to set the contrast level. You can also
use the arrow keys to adjust the value.
Contrast Slider Tab
Drag the slider tab left (flatter contrast) or right (higher contrast) to change the
contrast setting.
Reset Button
Click this button to reset the brightness and contrast values to the default values.
Contrast
Brightness

Canon CanoScan FS4000US Specifications

General

I/O ports	USB
Compatibility	Yes, non-machine specific device
Dimensions (WxDxH)	144 x 368 x 92 mm
Color scanning	Yes
Maximum scan size	216 x 297 mm
Button functions	Scan
Compatible operating systems	Windows 98, Windows 2000 Professional, Windows Me, Macintosh OS 8.6 - 9.1
Bundled software	ScanGear CS-U, ScanGear Toolbox, OmniPage Pro 9.0 for Windows, Canon Plug-in Module CS-U, CanoScan Toolbox, and OmniPage SE for Mac OS; ArcSoft Photo Studio 2000, CanoScan Setup Utility, and Adobe Acrobat Reader for both Windows/Mac OS
Scanner type	Film/slide scanner
Sustainability certificates	ENERGY STAR
Power consumption (typical)	35 W

Weight and Dimensions

Weight	2400 g