Canon CHDK - Zebra Parameters; Draw Zebra

Show Histo Ev Grid Enable [•] / Disable [ ] < Histogram parameters < Main Menu
Adds 4 or 5 vertical lines to the histogram dividing the histogram by full stops.
!!!!!
!!!!!!EV Grid Enabled
!!!!!!!!!!!!!
!!!!
!!
Zebra parameters < Main Menu
Zebra is a feature that indicates over and under
exposed areas of the scene. When the shutter is half-
pressed, the areas of the scene that are under or over
exposed will turn red. The zebra effect can also be
applied to existing images by half-pressing the shutter
during playback mode.
Draw Zebra Enable [•] / Disable [ ]
Enables the drawing of over/under exposure indicators.
Zebra mode [Blink 1, Blink 2, Blink 3, Solid, Zebra 1, Zebra 2]
Determines how the over/under exposed areas will be indicated.
•
Blink 1 – Solid coverage, blinks every ½ second.
•
Blink 2 – Solid coverage, blinks every second.
•
Blink 3 – Solid coverage, blinks every two seconds.
•
Solid – Solid coverage, no blinking.
•
Zebra 1 – Striped coverage, thin diagonal lines.
•
Zebra 2 – Striped coverage, thick diagonal lines.
Zebra Solid Zebra 1 Zebra 2
24