•
CCD - Display the temperature of the CCD. Let's you know when it might be getting too
warm. Or when it's cold enough to take lower-noise images.
•
Battery - Displays the temperature of the battery compartment.
! ! !! NOTE: 3rd party LI-ION battery packs may always report a constant temperature, e.g.
!! 25°C or 28°C.
•
all - Displays all 3 values.
! in Fahrenheit - !! Enable [•] / Disable [ ]
! Default is Centigrade, check this for Fahrenheit.!
! Note: Not all models have a separate temperature sensor for each component, and due to
! differences in design, values reported by different models may not be directly comparable.
OSD layout editor < OSD parameters < Main Menu
The OSD items can be rearranged to suit personal preferences and to avoid the Canon items on
the display.
!
Enter Layout Editor
!!
Histogram selected
!
DOF calculator selected
When a feature is selected you can use the rocker switch to move it around. A red highlight
displays giving the name of the feature being moved and its position in X, Y format.
•
FUNC.SET button - Switch between display features.
•
4-Direction switch/rocker – moves the selected feature.
•
Display button – Toggles between 1 pixel per move or 10 pixels per move.
28
To Next Page
Loading...
