To Next PageTo Next PageWhy is my Canon DR-1210C Scanner not recognized by my computer?
If your Canon Scanner isn't recognized by your computer, ensure the USB cable is properly connected. If the issue persists, try resetting the scanner and restarting your computer. If this doesn't work, install the scanner driver. If you are still experiencing issues, install a recommended USB card, or use the packaged USB cable or any other appropriate cable on the market.
Why is my Canon Scanner scanning completely black or white images?
If your Canon Scanner is producing completely black or white images, the “Brightness” setting may be incorrect. Change the brightness setting, and adjust the “Contrast” if needed. Also, check and change the “Paper Source” setting.
What to do if the feeder is not connected to my Canon DR-1210C?
If the feeder of your Canon Scanner is not connected, make sure the ADF cable is connected. You may also need to reset the power or restart the computer.
Why is my Canon DR-1210C document feed not working properly?
If your Canon Scanner is not feeding documents correctly, resulting in jams, double feeds, or skew, ensure you are using documents that meet the scanner's specifications or try using the flatbed. Also, make sure the roller unit and separation pad are properly mounted and clean; if they are dirty, clean or replace them.
Why are my Canon Scanner images skewed?
If images from your Canon Scanner are skewed, ensure the document is properly set.
Why is my Canon DR-1210C not feeding the document?
If the document is not being fed into the Canon Scanner, ensure that the scanner setting is properly set.
How to fix a paper jam in my Canon Scanner?
If your Canon Scanner is experiencing paper jams, it might be due to dirty rollers or a dirty separation pad. To resolve this, try cleaning or replacing the roller and the separation pad.
How to remove spots and streaks from Canon DR-1210C images?
If you notice spots and streaks on images scanned with your Canon Scanner, the roller unit, separation pad, or reading glass may be dirty. Clean or replace the roller unit and/or the separation pad if you are using feeder scanning. Clean the reading glass. If scratches are found or the back surface is dirty, replace the main body.
How do I remove black borders from Canon Scanner images?
If your Canon Scanner is adding black borders around the image, the “Page Size” setting may be incorrect. Change the setting. Also, ensure the document is set at the correct position.
How to fix missing outer areas on Canon Scanner images?
If the outer areas of the image disappear when using your Canon Scanner, adjust the document settings by disabling functions like “Auto-detection”.
General