166
Shutter Speed and Aperture Value Readouts
Shutter speed readout
The shutter speed is normally displayed in 1/2-stop increments. Numbers from “ ” to “ ”
denote the denominator of the shutter speed fraction: for example, “
” is 1/125 seconds. In
addition, “
” is 0.3 seconds, and “ ” is 15 seconds.
Aperture value readout
The aperture value is normally displayed in 1/2-stop increments. The larger the number, the
smaller the aperture opening. The range of aperture values (f/numbers) displayed depends on
the lens used.
C.Fn-06-1, the shutter speed and aperture value can be set in 1/3-stop increments.
(→p.122)
1/2-stop increments
Shutter speed Aperture value Shutter speed Aperture value
1/3-stop increments
To Next Page
