281
The images recorded on one card can be copied to the other card.
1
Select [Image copy].
Under the [31] tab, select [Image
copy], then press <0>.
2
Select [Sel.Image].
Check the copy source and target
card’s capacity.
Turn the <5> dial to select
[Sel.Image], then press <0>.
3
Select the folder.
Turn the <5> dial to select the folder
containing the image to be copied,
then press <0>.
Refer to the images displayed on the
right to select the desired folder.
X The images in the selected folder will
be displayed.
a Copying Images
3 Copying Individual Images
Number of images in folder
Folder name
Lowest file number
Highest file number
The copy source is the card selected in the [51: Record func+card/folder
sel.] menu’s [Record/play] ([Playback]) setting.
To Next Page
Loading...
