36
Installing and Removing the Card
4
Set the power switch to <1>
(p.38).
X The number of possible shots will be
displayed on the top LCD panel and
in the viewfinder.
X The rear LCD panel will indicate
which card(s) has been inserted.
The images will be recorded to the
card with the < > icon next to the
respective card’s indicator.
Card 1 indicator
Card 2 indicator
Card selection icon
Possible shots
Hard disk-type cards cannot be used with this camera.
Although the two types of CF (CompactFlash) cards have different
thicknesses, either type can be inserted into the camera.
Ultra DMA (UDMA) CF cards can also be used with the camera. UDMA
CF cards enable faster data writing.
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting [z3: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card (p.368).
To Next Page
Loading...
