Canon EOS 70D - Auto Exposure Bracketing (AEB)

115
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±3 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Select [Expo.comp./AEB].
Under the [z3] tab, select
[Expo.comp./AEB], then press
<0>.
2
Set the AEB range.
Turn the <6> dial to set the AEB
range. Press the <U> key to set
the exposure compensation amount.
Press <0> to set it.
X When you exit the menu, <h> and
the AEB range will be displayed on
the LCD panel.
3
Take the picture.
The three bracketed shots will be
taken according to the drive mode set
in this sequence: Standard exposure,
decreased exposure, and increased
exposure.
AEB will not be automatically
canceled. To cancel AEB, follow step
2 to turn off the AEB range display.
h Auto Exposure Bracketing (AEB)N
AEB range