273
Z1
When the Live View shooting/Movie
shooting switch is set to <k>, the
[Z1] and [Z2] tabs dedicated to
movie shooting will be displayed.
AF method
The AF methods are the same as described on pages 233-242. You
can select [u+Tracking], [FlexiZone - Multi], or [FlexiZone -
Single].
For movie shooting, [Quick mode] cannot be set.
Movie Servo AF
During movie shooting, the camera focuses the subject
continuously. The default setting is [Enable].
When [Enable] is set:
• The camera focuses the subject continuously even when you are
not pressing the shutter button halfway.
• Since this drives the lens continuously, it will consume battery
power and shorten the movie shooting time (p.266).
• With certain lenses, the lens operation noise during focusing may
be recorded. To reduce the recording of the lens operation noise,
use a commercially-available external microphone. With EF-S18-
55mm f/3.5-5.6 IS STM or EF-S18-135mm f/3.5-5.6 IS STM lens,
the lens operation noise is less prone to be recorded.
• If you want to set the lens focus mode switch to <MF> during
Movie Servo AF, first set the Live View shooting/Movie shooting
switch to <A>.
3 Menu Function Settings
To Next Page
