3 Setting the Time Code
272
If the frame rate setting is 6 (29.97 fps) or 8 (59.94 fps), the time
code’s frame count causes a discrepancy between the actual time and
time code. This discrepancy can be corrected automatically. This
correction function is called drop frame.
[Enable] : The discrepancy is corrected automatically by skipping
time code numbers (DF: Drop frame).
[Disable] : The discrepancy is not corrected (NDF: Non-drop frame).
The time code will be displayed as follows:
[Enable] (DF) : 00:00:00. (00:00:00.00 during playback)
[Disable] (NDF) : 00:00:00: (00:00:00:00 during playback)
Drop Frame
If the frame rate is 4 (23.98 fps), 5 (25.00 fps), or 7 (50.00 fps), there
will be no drop frames. (If 4 is set or if [53: Video system] is set to [PAL],
the drop frame option will not appear.)
To Next Page
