Canon GL1 - Page 87

87
E
Additional Information
When you play back a tape whose audio has been recorded on multiple channels, you can change the
output channels of that sound.
1. Set the camera to VCR, load a tape recorded with multiple-channel audio.
2. Open the VCR menu and select OUTPUT CH.
3. Select the output channel.
• Refer to the following list.
Selecting audio output channels
Tape recorded on
multiple channels
main + sub
main only
sub only
OUTPUT CH setting
L/R
L/L
R/R
Played back sound
Tape recorded with
stereo sound
L + R channels
L channel only
R channel only
OUTPUT CH•••L/R
(see p. 34)