Clearing Staple Jams
8-58
8
Troubleshooting
Clearing Staple Jams
If a staple jam occurs, follow the procedure described below to remove the jammed staples.
Finisher-AA1/Saddle Finisher-AA2 (Optional)
If a staple jam occurs in the stapler unit of the optional Finisher-AA1 or optional Saddle
Finisher-AA2, a screen similar to the one shown below appears on the touch panel display.
Check the location of the staple jam, and follow the procedure described below, and the
procedure that appears on the touch panel display, to remove any jammed staples.
IMPORTANT
Make sure to close all covers and drawers of the machine before clearing any staple jams.
1
Open the front cover of the finisher.
The Optional Finisher-AA1The Optional Saddle Finisher-AA2
To Next Page
