Canon ImagePress C700 - Page 75

Canon
Canon imagePRESS C800/C700 Service Guide
Table 38 – Booklet Trimmer-D1 Consumable Parts
Booklet Trimmer-D1 Consumable Parts
Item Item Number
2
Quantity
Estimated Yield
53
(copies/prints)
Remarks
Trimming upper blade unit FC3-4391-000 1 500,000 sets
Actual use in terms of number
of prints
Trimming lower blade FC3-3043-000 1 500,000 sets
2Part numbers are subject to change without notice.
53 Estimated Yield is based on LTR paper
Table 39 – Two-Knife Booklet Trimmer-A1 Consumable Parts List
Two Knife Booklet Trimmer-A1 Consumable Parts
Item Item Number
2
Quantity
Estimated Yield
53
(copies/prints)
Remarks
Front upper blade FC3-6269-000 1 500,000 sets
Actual use in terms of number
of prints.
Rear upper blade FC3-6270-000 1 500,000 sets
Lower blade FC3-6394-000 2 500,000 sets
2 Part numbers are subject to change without notice.
53 Estimated Yield is based on LTR paper
Table 40 – Professional Puncher-C1 Consumable Parts List
Professional Puncher-B1 Consumable Parts
Item Item Number
2
Quantity
Estimated Yield
53
(copies/prints)
Remarks
Back gage assembly FC3-6647-000 1 3,000,000
Replacement
2 Part numbers are subject to change without notice.
53 Estimated Yield is based on LTR paper
Table 41 – Professional Puncher Integration Unit-A1 Consumable Parts List
Professional Puncher Integration Unit-A1 Consumable Parts
Item Item Number
2
Quantity
Estimated Yield
53
(copies/prints)
Remarks
Static eliminator FC8-1584-000 1 1,000,000
2 Part numbers are subject to change without notice.
53 Estimated Yield is based on LTR paper
.
Canon imagePRESS C800/C700 Service Guide October 2014
Revision 2 Page 69