Canon imagePRESS C800/C700 Service Guide
Table 44 – Periodic Maintenance Items Continued
Periodic Maintenance Items (Based on LTR Paper)
Clean x Lubricate
Adjust
item
Interval (pages)
Action
Remarks
Post-secondary Transfer Sensor 300,000
Clean it with a blower brush.
Pre-fixing Feed Belt 300,000
Clean it with alcohol and lint-free paper
Secondary Transfer Static
Eliminator
300,000
Post-secondary Transfer Guide 300,000
ITB Drive Roller As needed basis
Clean it with alcohol and lint-free paper when
replacing the ITB, Primary Transfer Roller, or
Secondary Transfer Inner Roller.
ITB Steering Roller As needed basis
ITB Inner Scraper As needed basis
ITB Idler Roller A As needed basis
ITB Idler Roller B As needed basis
Secondary Transfer Inlet Upper
Guide Unit
As needed basis
Wraparound Prevention Guide As needed basis
ITB HP Sensor As needed basis
Clean it with a blower brush when replacing the
ITB, Primary Transfer Roller, or Secondary
ITB Displacement Sensor (Right)
As needed basis
ITB Displacement Sensor (Left) As needed basis
Fixing Refresh Roller 600,000
The counter value in service mode indicates the
time (the number of seconds) where the Refresh
Roller is engaged. Clean it with alcohol and lint-
Fixing Belt Unit Gear 600,000 500,000 ×
Apply grease (FY9-6036, SE1107) to cover the
grease-applicable area on the gear teeth surface
when replacing the Pressure Belt Unit.
Pressure Belt Unit Gear 600,000 500,000 ×
Apply grease (FY9-6036, SE1107) to cover the
grease-applicable area on the gear teeth surface
when replacing the Fixing Belt Unit.
Fixing Drive Unit Gear 600,000 500,000 ×
Apply grease (FY9-6036, SE1107) to cover the
grease-applicable area on the gear teeth surface
when replacing the Fixing Belt Unit, Pressure
Belt Unit, or Fixing Assembly.
Lower Belt Detection Roller,
Sensor Base
600,000 500,000
Clean it with dry lint-free paper when replacing
the Pressure Belt Unit.
Fixing Inlet Guide, Fixing Inlet
Sensor Flag
As needed basis
Clean it with alcohol and lint-free paper
Inner Delivery Unit Separation
Plate
As needed basis
Feed Roller (Vertical path) 300,000
Slave Roller (Vertical path) 300,000
Decurler Guide 300,000
Decurler Roller 1 300,000
Decurler Roller 2 300,000
54 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier.
Data is subject to change depending upon many factors including, without limitation, monthly copy
volume, environment, type of image printed and customer handling of the equipment.
Canon imagePRESS C800/C700 Service Guide October 2014
Revision 2 Page 73
To Next Page
