Canon imagePRESS C800/C700 Service Guide
Table 44 – Periodic Maintenance Items Continued
Periodic Maintenance Items (Based on LTR Paper)
Clean x Lubricate
Adjust
item
Interval (pages)
Action
Remarks
Decurler Sensor 1 As needed basis
Clean it with a blower brush.
Decurler Sensor 2 As needed basis
Feed Roller (Delivery reverse
path)
300,000
Clean it with alcohol and lint-free paper
Slave Roller (Delivery reverse
path)
300,000
Feed Roller (Buffer path) 300,000
Slave Roller (Buffer path) 300,000
Sponge Roller (Decurler) 300,000
between the pre-registration path
and the registration path)
As needed basis
Cleaning with lint-free paper moistened with
alcohol or dry wiping with the paper lint cleaning
Feed Roller and slave roller
(Duplex path, between the pre-
registration path and the
As needed basis
Clean it with alcohol and lint-free paper
Feed Sensor (Duplex path,
between the pre-registration path
and the registration path)
As needed basis
Clean it with a blower brush. Clean the Color
Sensor (option) with a blower brush.
Lead Sensor 160,000
Registration Sensor 160,000
Delivery Sensor 160,000
Registration Roller 80,000 Or 6 months
Lead Roller 1 80,000
Lead Roller 2 80,000
Lead Roller 3 80,000
Pullout Roller 80,000
Feed Roller 80,000
Delivery Roller 80,000
Rollers/Slave Roller 80,000
Scrapers 80,000
Height adjustment of ADF 80,000
Both sides of the Original Glass
(Large)
As necessary
Including the White Plate area on the back side
of the glass
Both sides of the Original Glass
(Small)
As necessary
Scanner Mirror (1st to 5th) As necessary
Scanner Rail As necessary ×/ Lubrication
54 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier.
Data is subject to change depending upon many factors including, without limitation, monthly copy
volume, environment, type of image printed and customer handling of the equipment.
Canon imagePRESS C800/C700 Service Guide October 2014
Revision 2 Page 74
To Next Page
