Canon imagePROGRAF iPF850 User Manual

Canon imagePROGRAF iPF850/iPF840/iPF830 Service Guide
imagePROGRAF iPF850/iPF840/iPF830 Service Guide July 2015
Page 43
Table 31 - imagePROGRAF iPF850/iPF840/iPF830 Specifications Continued
Item
Specification
USB Interface
• Type: Built-in
• Mode: Full Speed (12 Mbit/sec), High Speed (480 Mbit/sec), Bulk
transfer
• Connector type: Series B (4 pins)
Ethernet Interface
• Type: Built-in
• Standard: IEEE 802.3 10base-T,IEEE 802.3u 100base-TX/ Auto-
Negotiation, IEEE 802.3ab 1000base-T/ Auto-Negotiation, IEEE
802.3x Full Duplex
• Protocol: SNMP (Canon-MIB supported), HTTP, TCP/IP (IPv4/IPv6)
Approximate Dimensions
(W x D x H)
• imagePROGRAF iPF830: Main unit and Printer Stand Approximately
75" x 51" x 45" (1,905 mm x 1,295 x1,143 mm)
• imagePROGRAF iPF840: Main unit with printer stand, lower roll, lower
rail L/R, and portable basket Approximately 75" x 51" x 45"
(1,905 mm x 1,295 x1,143 mm)
•
imagePROGRAF iPF850: Main unit with printer stand, lower roll, lower
rail L/R, and stacker Approximately75" x 52" x 45"
(1,905 mm x 1,321 x1,143 mm)
Approximate Weight
• imagePROGRAF iPF830: Approximately 380 lb (roll holder included,
no inks, no print heads)
• imagePROGRAF iPF840: Approximately.417 lb (roll holder included,
no inks, no print heads)
• imagePROGRAF iPF850: Approximately 470 lb (roll holder included,
no inks, no print heads)
Table 32 - Printhead PF-04 Specifications
Printhead PF-04
Model PF-04
Type Bubble-jet on demand
Head configuration 6 colors integrated type (6 chips per Printhead times one (1) Printhead)
Nozzle pitch 1,200 dpi x 2
Nozzle per chip MBK: 5,120 nozzle, BK/C/M/Y: 2,560 nozzles for each color
Droplet size 4 picoliters per color
Head replacement User replacement

Canon imagePROGRAF iPF850 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF850
Category	Printer
Language	English