Canon imagePROGRAF iPF850/iPF840/iPF830 Service Guide
imagePROGRAF iPF850/iPF840/iPF830 Service Guide July 2015
Page 42
X. Appendix
A. Specifications
Note: All specifications are subject to change without notice.
Table 31 - imagePROGRAF iPF850/iPF840/iPF830 Specifications
Ink Type
Dye and pigment reactive ink: BK, MBK , C, M, Y (New Magenta ink same
to imagePROGRAF iPF780 series)
Power consumption
• imagePROGRAF iPF840/iPF830: Operation: 190 W or less
• imagePROGRAF iPF850: Operation: 200 W or less
Standby power consumption
100 V - 120V: 5.0 W or less
Standby power consumption
(At the low power mode)"
220 V - 240 V: 5.0 W or less
Default setting for the time to
enter the Sleep mode
Approximately 5 minutes
Approximately 0.5 W or less
Temperature: 59 - 86°F, Humidity: 10 - 80 % (Condensation free)
Acoustic Noise
(acoustic pressure)
• imagePROGRAF iPF840/iPF830: Operation: Approximately 52 dB (A)
or less Standby: Approximately 35 dB (A) or less (Measure based on
ISO 7779)
• imagePROGRAF iPF850: Operation: Approximately 7.5 Bels or less,
Measurement Conditions:: Plain paper, standard mode(1 pass/25 ips) /
Normal temperature and normal humidity
Approximately 0.02 mm (Theoretical value)
Line Accuracy
• imagePROGRAF iPF840/iPF830: Approximately ±0.1 % or less. User
adjustments are necessary. Printing environment and media must
match those used for the adjustments. CAD paper required: Plain
paper, CAD tracing paper, coated paper, CAD translucent matte film
only.
• imagePROGRAF iPF850: Approximately ±0.1 % or less, Without
Stacker User are adjustments necessary. Printing environment and
media must match those used for the adjustments. CAD paper
required: Plain paper, CAD tracing paper, coated paper, CAD
translucent matte film only.
Banding adjustment (Line Feed
adjustment)
Automatic / Manual
Automatic / Manual (5 levels)
Roll media remaining detection
function
Yes
320GB HDD / (512MB ) No Expansion