Mac OS X
Note
• If the status of the desired printer is not shown in imagePROGRAF Printmonitor , select the printer
again as follows.
1. Make sure the printer is on and connected to the network or to a local port.
2. In the Printer menu, select the name of the desired printer .
After the printer is detected, the printer status is shown.
3. If information about the printer is not shown in step 2, choose Search Printer in the Printer menu.
4. Select the zone to search (or select *(My Zone) if no zones have been set up) and click the
Search button.
Printer names listed in the Printer menu are updated with the printers that are now detected.
5. In the Printer menu, select the name of the desired printer .
After the printer is detected, the printer status is shown.
Software 573
To Next Page
Loading...
Need help?
General