Maintenance Cartridge
Replacing the Shaft Cleaner
Replace the Shaft Cleaner when you replace the Maintenance Cartridge . New Shaft Cleaner is included
with replacement Maintenance Cartridge .
After you execute Repl. maint cart and replace the Maintenance Cartridge , a message will appear on the
Display Screen requesting you to replace the Shaft Cleaner . Select Y es and press the OK button. Next,
go to step 4.
1. Press the Menu button to display MAIN MENU .
2. Press ▲ or ▼ to select Maintenance , and then press the ► button.
3. Press ▲ or ▼ to select Repl. S. Cleaner , and then press the ► button.
4. Press ▲ or ▼ to select Y es , and then press the OK button.
After the Carriage is moved, the Display Screen indicates Open Upper Cover .
Note
• If you do not respond within two minutes, shaft cleaner replacement is canceled and the printer goes
online automatically . In this case, repeat the procedure.
5. Open the T op Cover .
Maintenance 707
To Next Page
Loading...
Need help?
General