Other Maintenance
9. Repeat steps 5 and 6 to remove every Ink T ank .
10. Push down the release lever (a) as shown as you gently return every Ink T ank Lock Lever to
the original position.
1 1. Close the Ink T ank Cover .
At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the process is nished, Completed! T urn Power Off!! is displayed.
12. Press the OK button and turn of f the printer .
Important
• T urn of f the printer before you unplug it. It may damage the printer if you unplug it before it is of f and
transfer it in that state. If you accidentally unplug the printer , plug it in again, reinstall the Ink T anks ,
wait until the printer comes online, and follow this procedure again.
Maintenance 721
To Next Page
Loading...
Need help?
General