The Custom Size Settings dialog box opens.
3. Set the custom paper size3.
Enter the Width and Height values of the paper to be used, specify the Units, and then click OK.
4.
Complete the setup
4.
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified paper size.
Important
•
If the application software that created the document has a function for specifying height and width
values, use the application software to set the values. If the application software does not have such a
function or if the document does not print correctly, perform the above procedure from the printer driver
to set the values.
•
Printing may be disabled depending on the size of the specified user-defined media.
For information about printable sizes for user-defined media, see "Paper Sizes."
•
Any paper size that was set by using Custom Size can no longer be used after the application software
is closed.
136
To Next Page
Loading...
Need help?
General