Paper-related settings
This item is displayed by selecting Printer settings after selecting (Setup) on the HOME screen.
• Media type selection method•
Specifies a method to select the media type when paper is loaded.
◦ Manual◦
You need to select a media type from the registered media types manually.
◦ Auto detect◦
The media type estimated by the printer's sensor is set automatically.
As the estimation accuracy increases, it will be not necessary to select the media type each time.
◦ Auto with confirmation◦
Among the media types estimated by the printer's sensor, the most likely ones are listed at the top.
You need to select a media type from the listed media types manually.
◦ Use current media type◦
Select this to continue using the same type of paper.
Note
• When using the paper estimation function, the paper width detection function is enabled even if you•
set Detect paper width to Disable.
• If the loaded paper is used by your printer for the first time, or if there is no applicable media type,•
No selection log entry will be displayed.
If No selection log entry is displayed, select a media type manually.
At this time, the printer learns the data of the selected media type.
The next time the same paper is loaded, the media type is estimated from this data.
• When using a paper that is not listed in the paper information list, perform Create Custom Paper•
in Media Configuration Tool. After create the paper information, we recommend to perform Paper
feed adjustment.
• If the created custom paper does not appear as a candidate in the paper information list even if it is•
fed many times, perform Paper feed adjustment again.
• Errors may occur in the estimation results.•
• Manage remaining roll amount•
Selects the method to manage remaining roll amount and that to display warning when the roll is
running short.
◦ Barcodes◦
Manages remaining roll amount by using a barcode.
356
To Next Page
Loading...
