Changing the Print Head Height
The print head height setting affects printing quality.
Specifying a low print head height makes images clearer and enhances printing quality but may cause paper
to rub against the print head.
On the other hand, specifying a high print head height will prevent paper from rubbing against the print head
but may reduce the printing quality.
Important
• Paper rubbing against or becoming caught on the print head may jam or result in printed documents
that are soiled.
Note
• Raise or lower print head, depending on nature of the problem.•
Paper rubs against the Print Head
The edges of the paper are dirty
Image edges are blurred or white banding occurs
1. Select paper setting display area on HOME screen.1.
2. Select Paper settings.2.
3.
Select Advanced.
3.
4.
Select Paper thickness (head height).
4.
5.
Drag slider to set paper thickness (head height) and select OK.
5.
Note
•
When Auto is set to ON, before printing, the printer automatically adjusts the print head height
•
to the level optimal for the ambient temperature and humidity. You can check the setting for the
previous print job in Values applied with auto settings.
Printer information
•
When Auto is set to OFF, the setting selected during this procedure is applied.
566