HP-GL/2 print settings
Print quality settings
Color mode
Color (perceptual) / Color (saturation)* / Color (correct off) /
Monochrome / Monochrome BMP
Print quality
5 (Fast) / 4 / 3* / 2 / 1 (High)
Input resolution
600 dpi* / 300 dpi
Print target
Photo / Line drawing* / Auto select
Paper settings
Paper src
Auto select* / Roll paper / Manual
Margin
3mm* / 5mm
Oversize
Enable* / Disable
Save paper
ON / OFF*
Rotate
0 degrees* / 90 degrees
Auto rotation
ON / OFF*
Enlarge/Reduce
Fit paper size / Same size* / Scaling
Print centered
ON / OFF*
Cut to standard size
ON / OFF*
Nesting
Use nesting function
Enable / Disable*
Nesting WaitTime
1 / 2* / ... / 98 / 99
Print cut lines
320
To Next Page
Loading...
Need help?
General