Canon imagePROGRAF TM-250 Online Manual

Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows.
▪ Optimize inbound WSD▪
Selecting Enable allows you to receive the WSD printing data faster.
▪ Timeout settings▪
Specifies the timeout length.
◦ Bonjour settings◦
Setting items for LAN using Bonjour.
▪ Enable/disable Bonjour▪
Selecting Enable allows you to use Bonjour to perform the network settings.
▪ Service name▪
Specifies the Bonjour service name. You can use up to 48 characters for the name.
The factory default setting is "Canon XX-NNN" where XX-NNN is the model name of your
printer.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ SNTP settings◦
Performs various settings for SNTP (Simple Network Time Protocol).
◦ Spanning tree settings◦
Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.
◦ LPR protocol settings◦
Enables/Disables the LPR setting.
◦ RAW protocol◦
Enables/Disables RAW printing.
◦ LLMNR◦
Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Gigabit Ethernet settings◦
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ Use Dedicated Port◦
Selects whether to use a dedicated port for a command sent from a Canon application to the printer.
Selecting ON allows you to use the dedicated port.
◦ IPP settings◦
▪ Enable/disable IPP▪
353

Canon imagePROGRAF TM-250 Specifications

General

Brand	Canon
Model	imagePROGRAF TM-250
Category	Printer
Language	English