• By default, nozzles are checked at fixed intervals.•
Auto maintenance settings
Perform cleaning as follows.
1. Select (Setup) on HOME screen.1.
2. Select Maintenance.2.
3. Select Print Head Cleaning.3.
4. Select Cleaning, Deep Cleaning, or System Cleaning.4.
5.
Select ink group to be cleaned.
5.
• All colors
•
Pattern 1: MBK / BK
•
Pattern 2: Y / M / C
A confirmation message appears.
6.
Select Yes.
6.
Head cleaning is now executed.
7.
Print a test pattern to check the nozzles and determine whether cleaning has cleared the
7.
nozzles.
Checking for Nozzle Clogging
549
To Next Page
Loading...
