• The top cover is open•
Close the top cover.
• The ink tank cover is open•
Close the ink tank cover.
• The print head is not installed•
Replacing the Print Head
• The ink tank is not installed•
Replacing Ink Tanks
• If "Error" is shown on the touch screen•
Check the message on the touch screen and take action as necessary.
• The ON button and Status lamp never light up, and nothing appears on the touch screen•
Check the connection at the plug and electrical outlet.
Turning the printer off
Important
• Never disconnect the printer's power supply or unplug it during a print job. This may damage the•
printer.
1.
Make sure no print jobs are in progress.
1.
While the Status lamp is flashing, the printer is running. The color of the lamp indicates the following
states.
If the Status lamp is flashing orange, check the message on the touch screen and take action as
necessary.
If the Status lamp is flashing white, the printer is printing, receiving data, etc. Turn off the power after
the Status lamp turns off.
70
To Next Page
Loading...
