Chapter 14
14-23
14.2.2 Malfunction
14.2.2.1 No Power
14.2.2.1.1 Upon installation, machine does not start up / LCD does not come
on although main power indicator on control panel lights up: Poor
connection of ROM/RAM
0008-3477
[ Inspected by Canon Inc. ]
Field Remedy
In inspection, reinsertion of the ROM corrected the symptoms. If any of the symptoms
mentioned above occurs during installation, reinsert the BOOTROM or the RAM.
14.2.2.2 Noise
14.2.2.2.1 Noise at Time of Pickup from the Cassette
0007-7052
<Cause>
When double-feeding occurs at time of pickup, the contact between the sheets and the feed
roller and the separation roller cause the separation roller assembly to vibrate.
<Field Remedy>
Replace the roller with a sponge retard roller (FB5-0873; to be used as needed; cassette
only).
To Next Page
Loading...
Need help?
General
