Canon imageRUNNER ADVANCE DX C5800 Series Customer Expectations Document
Revision 6 imageRUNNER ADVANCE DX C5800 Series Customer Expectations Document Page 68
7.12 Copy Card Reader-F1
Item Specifications
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Magnetic Card Reading
Direction
Face up
Store/Replay
Replay
Power Source
From the main unit.
Dimensions (W x D x H)
29
3 1/2” x 3 3/4” x 1 5/8” (88 mm x 96 mm x 40 mm)
Approximately 7.1 oz (200 g) (Includes the attachment kit and cable.)
7.13 Super G3 FAX Board-AX1
Protocol Specifications
30
Telephone Line Used
31
Public Switched Telephone Network
Scan Line Density
(Scan, Transmission)
Standard: 8 pels
32
/mm x 3.85 line/mm
Fine: 8 pels
32
/mm x 7.7 line/mm
Super-Fine: 8 pels
32
/mm x 15.4 line/mm
32
Transmission Speed
Super G3: 33.6 kbps
G3: 14.4 kbps
Compression Method
MH, MR, MMR, JBIG
Transmission Type
Super G3, G3
Sending Original Size
11” x 17” to STMTR
Receiving Paper Size
11” x 17” to STMTR
Transmission Times
JBIG: Approximately 2.6 seconds
Number of Memory
Receive Jobs
Up to 320 jobs
29 Excludes the attachment kit and cable.
30 The specifications remain the same even when the optional Super G3 2
nd
Line Fax Board-AX1 or Super G3
3
rd
/4
th
Line Fax Board-AX1 is installed.
31 If the user uses an IP telephone service, facsimile communications may not be performed normally via an IP
telephone line. It is recommended to use a general telephone (Public Switched Telephone Network) line for
facsimile communications.
32 Pels stands for picture elements (pixels).
To Next Page
Loading...
Need help?
General
