Canon iP2780 - Page 8

(8/23)
No. Name Function Remarks
(1) Test Print Service test print Service test print:
- Model name
- ROM version
- Ink absorber counter value (ink amount in the ink
absorber)
- USB serial number
- Destination
- EEPROM information
- Barcode (model name + destination), etc.
(2) EEPROM EEPROM information
print
The dialog box opens to select the paper source.
Select Rear tray, and click OK.
EEPROM information print:
- Model name
- Destination
- ROM version
- Ink absorber counter value (ink amount in the ink
absorber)
- Print information
- Error information, etc.
(3) Nozzle Check Nozzle check pattern print The dialog box opens to select the paper source.
Select Rear tray, and click OK.
The same nozzle check pattern as the one in the
user mode is printed.
(4) Integration Unified inspection pattern
print
The dialog box opens to select the paper source.
Select Rear tray, and click OK.
The unified inspection pattern (for reduction of time
required for the inspection) is printed.
(5)* EEPROM EEPROM information
saving
When no printing can be performed due to a
problem, the EEPROM information is displayed on
the computer or is saved to the computer as a text
file.
To save the EEPROM information, click Save As in
the EEPROM information window, and specify a
desired location and file name.
(6) CD-R CD-R check pattern print Not used.
(7) LF / Eject LF / Eject correction
pattern print
Not used.
(8) Left Margin Left margin pattern print Not used.
(9)* Auto Cleaning Enabling / disabling of
automatic print head
cleaning
Automatic print head cleaning prior to printing
(disabled at default).
Select this option to enable the cleaning.
(10) Deep Cleaning Print head deep cleaning Cleaning of both Black and Color at the same time.
(11) Main Main ink absorber counter
resetting
Set a sheet of A4 or Letter sized plain paper in the
rear tray. After the ink absorber counter is reset, the
counter value (in %) is printed automatically.