To Next PageTo Next PageWhat to do if my Canon All in One Printer shows a URL Scheme error (not https)?
If the Canon All in One Printer displays a 'URL Scheme error(not https)', it means the URL header of the registered server is not using 'https'. To resolve this, correct the server URL header to 'https' via: Service Mode > #E-RDS > RGW-ADDRESS.
Why is the communication test not performed on my Canon iR1024iF?
If your Canon All in One Printer suspends and the communication test isn't performed, it's likely because e-RDS is ON but was activated without completing the Communication test, possibly after a device reboot. To fix this, perform and complete the Communication test (COM-TEST).
What to do if Event Registration failed on Canon iR1024iF All in One Printer?
If the Canon All in One Printer fails during event registration, it indicates a processing failure within the device. Try turning the device OFF and then ON again. If the problem persists, reinstall the device system software.
How to fix communication test failure on Canon iR1024iF All in One Printer?
If the communication test fails on your Canon All in One Printer, you should check the firmware version and the network settings. Also, check the results of the communication test.
Why are no e-RDS settings items found in the Service Mode of my Canon All in One Printer?
To address the issue of no e-RDS settings items being found in the Service Mode of your Canon All in One Printer, ensure that the firmware version is WLaa-60-xx or later. Also, verify that the network is up and running.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 24 ppm (A4) |
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Fax Transmission Speed | Approx. 3 seconds per page |
| Paper Output | 100 sheets |
| Memory | 128 MB |
| Maximum Paper Size | A4 |
| Copy Speed | 24 cpm (A4) |
| Fax Resolution | 200 x 400 dpi |
| Paper Capacity | 100-sheet multi-purpose tray |
| Media Types | Plain, Transparency, Label, Envelope |
| Media Sizes | A4, A5, B5, Legal, Letter, Executive, Envelope (COM10, Monarch, DL, ISO-C5) |
| Duplex Printing | Yes |
| Warm-up Time | 0 seconds |
| First Print Out Time | Less than 8 seconds |
| Interface | USB 2.0 |
| Operating System Compatibility | Windows, Mac OS |
Verifies that all necessary components are present before starting setup.
Explains sender information requirements for fax headers and transmission.
Details on using the control panel keys for inputting text and numbers.
Guide to choose the appropriate receive mode (FaxOnly, AnsMode, Manual, FaxTel).
Procedure for configuring network settings, including IP address assignment.
Detailed steps for installing printer, fax, and scanner drivers and associated software.
Instructions for uninstalling the machine's printer, fax, and scanner drivers.
Procedure for replacing the toner cartridge when it is depleted or empty.
Procedure for replacing the drum unit when the machine indicates it is necessary.
Instructions for removing jammed documents from the automatic document feeder or delivery slot.
Guidelines for safe operation, cleaning, and general care of the machine to prevent damage.
Recommendations for placing the machine in a suitable environment, considering temperature, humidity, and ventilation.
Warnings and precautions regarding potential hazards from the machine's laser components.
