What to do if my Canon iR1025 All in One Printer shows a URL Scheme error (not https)?
If the Canon All in One Printer displays a 'URL Scheme error(not https)', it means the URL header of the registered server is not using 'https'. To resolve this, correct the server URL header to 'https' via: Service Mode > #E-RDS > RGW-ADDRESS.
Why is the communication test not performed on my Canon iR1025?
If your Canon All in One Printer suspends and the communication test isn't performed, it's likely because e-RDS is ON but was activated without completing the Communication test, possibly after a device reboot. To fix this, perform and complete the Communication test (COM-TEST).
What to do if Event Registration failed on Canon iR1025 All in One Printer?
If the Canon All in One Printer fails during event registration, it indicates a processing failure within the device. Try turning the device OFF and then ON again. If the problem persists, reinstall the device system software.
How to fix communication test failure on Canon iR1025 All in One Printer?
If the communication test fails on your Canon All in One Printer, you should check the firmware version and the network settings. Also, check the results of the communication test.
Why are no e-RDS settings items found in the Service Mode of my Canon All in One Printer?
To address the issue of no e-RDS settings items being found in the Service Mode of your Canon All in One Printer, ensure that the firmware version is WLaa-60-xx or later. Also, verify that the network is up and running.
Covers essential safety precautions related to toner, laser light, fire hazards, and battery handling.
Provides instructions for unpacking the machine and the main body installation procedure.
Details the specifications, control methods, and functions of the original exposure system.
Provides procedures for replacing key components of the original exposure system.
Covers the construction of the laser scanner unit, including specifications and control mechanisms.
Provides the procedure for replacing the Laser Scanner Unit.
Details the construction of the image formation system, including specifications and control mechanisms.
Provides procedures for replacing key components involved in image formation.
Covers the construction of the pickup/feeding system, including sensors and rollers.
Provides procedures for replacing various parts within the pickup and feeding systems.
Covers the construction of the fixing system, including specifications and control mechanisms.
Provides procedures for replacing components of the fixing system.
Provides procedures for replacing external covers and various internal components.
Covers the basic construction of the ADF, including outline and drive mechanism.
Provides procedures for replacing parts related to the ADF and its sub-systems.
Provides an overview of e-Maintenance and imageWARE Remote features and configuration.
Provides troubleshooting steps for common e-RDS issues like missing settings or communication failures.
Lists error codes with their main causes/symptoms and corresponding countermeasures.
General| Print Technology | Laser |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Paper Output | 100 sheets |
| Duplex Printing | Manual |
| Multiple Copy | Up to 99 copies |
| Functions | Print, Copy, Scan |
| Maximum Paper Size | A4 |
| Scan Resolution | 600 x 600 dpi |
| Connectivity | USB 2.0 |
| Media Types Supported | Plain Paper, Heavy Paper, Recycled Paper, Transparency, Labels, Envelopes |
| Media Sizes Supported | A4, A5, B5, Legal, Letter, Executive, Envelope |
| Scan to | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Mac |
| Print Speed | 25 ppm |
To Next Page
