To Next PageTo Next PageWhat to do if my Canon All in One Printer shows a URL Scheme error (not https)?
If the Canon All in One Printer displays a 'URL Scheme error(not https)', it means the URL header of the registered server is not using 'https'. To resolve this, correct the server URL header to 'https' via: Service Mode > #E-RDS > RGW-ADDRESS.
Why is the communication test not performed on my Canon iR1020J All in One Printer?
If your Canon All in One Printer suspends and the communication test isn't performed, it's likely because e-RDS is ON but was activated without completing the Communication test, possibly after a device reboot. To fix this, perform and complete the Communication test (COM-TEST).
What to do if Event Registration failed on Canon iR1020J?
If the Canon All in One Printer fails during event registration, it indicates a processing failure within the device. Try turning the device OFF and then ON again. If the problem persists, reinstall the device system software.
How to fix communication test failure on Canon iR1020J?
If the communication test fails on your Canon All in One Printer, you should check the firmware version and the network settings. Also, check the results of the communication test.
Why are no e-RDS settings items found in the Service Mode of my Canon All in One Printer?
To address the issue of no e-RDS settings items being found in the Service Mode of your Canon All in One Printer, ensure that the firmware version is WLaa-60-xx or later. Also, verify that the network is up and running.
General| Functions | Print, Copy, Scan |
|---|---|
| Paper Output Capacity | 100 sheets |
| Copy Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Print Speed | 20 ppm |
| Print Resolution | 600 x 600 dpi |
| First Print Time | Less than 10 seconds |
| Paper Input Capacity | 250 sheets |
| Supported Paper Sizes | A4, A5, B5, Executive |
| Duplex Printing | No |
| Copy Speed | 20 cpm |
| Multiple Copy | Up to 99 copies |
| Scan Resolution | 600 x 600 dpi |
| Scanner Type | Flatbed |
| Interface | USB 2.0 |
| Supported OS | Windows, Mac |
Lists necessary items for machine setup.
Troubleshooting common error messages displayed on the machine.
A guide to choosing the appropriate fax reception mode.
Explains how to connect the machine to a network via LAN or USB.
Discusses the necessity of IP address configuration for network communication.
Explains the process of installing printer, fax, and scanner drivers.
Guides users on how to uninstall the iR printer drivers.
How to enter the recipient's fax number or email address.
How to initiate a fax send from a computer.
Final step to send the fax.
Steps to set up the machine for network access.
Detailed instructions for replacing the toner cartridge.
Detailed instructions for replacing the drum unit.
Alerts to potential death or serious injury risks.
Provides guidance to avoid machine damage or personal injury.
