Canon iR3235 Guide

7
Using the Express Copy Basic Features Screen
Enlarging/Reducing Originals with Copy Ratios Set Independently for the X and Y Axes (XY
Zoom)
7-19
Enlarging/Reducing Originals with Copy Ratios Set
Independently for the X and Y Axes (XY Zoom)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Setting the X
and Y Axes Independently(p.3-24)."
Remark
You cannot enlarge/reduce highly transparent
originals, such as transparencies, in the Auto XY Zoom
mode. To make such copies, specify the copy ratio.
If you set the Auto XY Zoom mode, select the paper
size using the Manual Paper Selection mode. If you do
not select a paper size, Paper Drawer 1 is
automatically selected and the copy ratio is set to
match the size of the paper loaded in that drawer.
If you set the copy ratio in the Auto XY Zoom mode,
Auto Orientation is not performed.
1. Press [Other Ratio Settings] → [XY Zoom].
2. Press [X] (horizontal axis) or [Y] (vertical axis) → enter a value.
Press [Auto XY Zoom] to set the copy ratios automatically.
Acesst 1.0 6251194

Canon iR3235 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (Optional)
Fax Transmission Speed	33.6 Kbps
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	150, 000 pages
Connectivity	USB, Ethernet
Warm-up Time	30 seconds or less
Memory	512 MB
Hard Disk Drive	80 GB
Paper Input	2 x 550-sheet cassettes, 50-sheet multipurpose tray
Paper Sizes	A4, A5, B5, Legal, Letter, Executive
Multiple Copy	Up to 999 copies
Zoom	25-400%
Scan Destinations	Email
Fax Resolution	Up to 400 x 400 dpi
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac
Copy Speed	35 cpm
Type	Multifunction
Duplex Printing	Automatic
Weight	Approx. 50.5 kg