Canon iR3235 Guide

7
Using the Express Copy Basic Features Screen
Combining Multiple Batches of Originals with Different Copy Settings (Job Block Combination) 7-103
Combining Multiple Batches of Originals with Different Copy
Settings (Job Block Combination)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Combining
Multiple Batches of Originals with Different Copy Settings(p.4-84)."
Remark
You can use the Cover/Sheet Insertion mode for the
combined document. You cannot use the Cover/Sheet
Insertion mode for each batch of originals.
If you use the Job Block Combination mode, the Job
Build mode is automatically set for each batch of
originals. You cannot use the Job Build mode for the
combined document.
You cannot make an Interrupt copy while copying with
the Job Block Combination mode.
You cannot store the Job Block Combination mode in
Standard Settings.
You cannot store the Job Block Combination mode in
Mode Memory.
You cannot recall the Job Block Combination mode.
1. Press [Others] → [Job Block Combination].
2. Press [Set] → specify the copy settings for the combined document →
press [OK].
If you select special features before setting the Job Block Combination mode, the selected
special features will be retained for the combined document.
Acesst 1.0 6251194

Canon iR3235 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (Optional)
Fax Transmission Speed	33.6 Kbps
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	150, 000 pages
Connectivity	USB, Ethernet
Warm-up Time	30 seconds or less
Memory	512 MB
Hard Disk Drive	80 GB
Paper Input	2 x 550-sheet cassettes, 50-sheet multipurpose tray
Paper Sizes	A4, A5, B5, Legal, Letter, Executive
Multiple Copy	Up to 999 copies
Zoom	25-400%
Scan Destinations	Email
Fax Resolution	Up to 400 x 400 dpi
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac
Copy Speed	35 cpm
Type	Multifunction
Duplex Printing	Automatic
Weight	Approx. 50.5 kg