4. Turn the handle in the direction of the arrow until it
securely stops and the die is locked.
5. Close the Front Cover.
Connecting the Cables
■ Connecting the Shunt Cable
● Connection with the Host Machine or
Buffer Pass Unit
1. Connect the Shunt Cable.
< imagePRESS C10000VP/8000VP Series >
• Remove the screws from the host machine, and
connect the Shunt Cable.
1. Installation
12
閲 FT2-0208-030_20160510.pdf 12 2016/05/10 14:39:52
To Next Page
Loading...
