82
E
Using the Full
Range of Features
Six-second auto date
The 6-second auto date appears for 6 seconds to mark the changeover of a day if
the tape was being recorded at 12:00 midnight. It also appears for 6 seconds when
you start playback and have the data code turned off. The 6-second auto date will
adjust for any time zone changes you have indicated.
To turn the 6-second auto date on, open the menu and select
DISP.SET UP. Then select 6SEC. DATE, set it to ON and close the
menu.
Note:
• When 6SEC.DATE is turned on but DISPLAYS ( 160) is turned off, the
6-second auto date will still appear for 6 seconds.
To Next Page
